Shenzhen Sunwin E-Commerce Co., Ltd.
Main products:DSLR Follow Focus,PLC Programing Cable,CNC Break Broad,HDMI Video Converter Card,5 Axis Stepper Motor Driver Board
Products
Contact Us
  • Contact Person : Mr. Pang Derek
  • Company Name : Shenzhen Sunwin E-Commerce Co., Ltd.
  • Tel : 86-0755-27213083
  • Fax : 86-0755-27213083
  • Address : Guangdong,Shenzhen,Room1318, Jiangshi Building, Xintian Street, Fuyong District, Bao'an
  • Country/Region : China
  • Zip : 518103

ETCR1000A Non Contact 3 Phase Rotation Tester Indicator #2

ETCR1000A Non Contact 3 Phase Rotation Tester Indicator #2
Product Detailed
phase circuit using a static induction voltage clip. The static induction voltage clips are used to be able to clip on a clad

Product Features:

ISO, Patent & CE certificate OEM services available Function: phase detection (positive/negative) Display: LED Dimension (mm): 70*75*30 Weight(g): 270                                                    Continuously using 200 hours Meets IEC-10101 (EN61010) ,CAT III (600V) safety requirement Electricity range: AC60~600V,40 Hz~70Hz( continuous sine wave input ) The highest detected voltage: AC600V Insulating Strength: 5.4kVrms Safety suitable for: 100Mva

Introduction

This is a phase detector, designed to perform phase sequence checks and live line checks of a 3-phase circuit using a static induction voltage clip.

The static induction voltage clips are used to be able to clip on a cladded wire.

It is small with a CAT 600V safety rating.

Red LED lamps are used to make the indication visible in dimly lit areas.

The direction of phase sequence can be checked easily using the LED lamps, which blink in order

Specifications

1). Basic Specifications

Function

Phase detection (positive/negative)

Voltage detection method

Static induction

Object to be connected

Insulated wire (nominal sectional area of the conductor: 2 to 120mm2,

finished outer diameter: up to 17mm)

Performance-guarantee voltage range

3-phase, 70V to 600 VAC (sine wave,continuous)

Operating frequency range

45Hz to 66Hz

2). Display

Phase-detection

indication

Positive phase sequence:

The four phase-sequence lamps blink order (clockwise) and the buzzer sounds intermittently.

Negative phase sequence:

The four phase-sequence lamps blink in order (counterclockwise) and the

buzzer sounds continuously.

Line-voltage indication

R-S lamp, S-T lamp

Power indication

Power ON lamp: lights up (Power ON)

blinks (Battery Low)

3). General Specifications

Operating temperature and humidity

-10 to 40(32 to 104), 80%RH or less ( with no condensation)

Storage temperature and humidity

-20 to 60 (-4 to 140), 80%RH or less (with no condensation)

Location for use

Altitude up to 2000m(6562 feet), indoors

Maximum rated voltage to earth

600V

Dielectric strength

5.4kVrms

Power supply

Rated supply voltage 1.5VDC×2 Two AA size batteries

Maximum rated power

300mVA

Continuous operating time*

Approx.70 hours(Power ON, Standby state, using R6P manganese battery)

*Battery life

Auto Power Off

(This function can not Be canceled.)

The power will be turned off automatically if the Instrument remains idle

for 15 minutes after the power is turned on. To reset, turn the power on

again using the Power ON switch.

Options

Carrying case, Strap*, Spiral tube*, Instruction manual, Two R6P

manganese batteries. *Attaching as the occasion demands.

Cable length

Approx. 0.7m

Dimensions and mass

Approx. 70W×75H×30Dmm(2.76W×2.95H×1.18D)

(excluding projections), Approx. 200g(7.1oz)

Applicable standards

Safety EN61010-1:2001,EN61010-031:2002

Pollution degree2, Measurement category CAT III(600V)(anticipated

transient overvoltage 6000V)

EMC EN61326:1997+A1:1998+A2:2001

Packing

Phase Detector: 1 piece; strap: 1 piece; Carrying Case: 1 piece

ETCR1000A Non Contact 3 Phase Rotation Tester Indicator #2



Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.